Ok so lets move into the interior for now.
I needed to get this mess cleaned up. Its wiring for the door + speakers, dome light switch, elec tcase ecu and the heater box. So i disassembled the harness and routed them all separately to clean this corner up a bit.
So now heres the reason im working on cleaning up the kick panels. Im retrofitting the 80-86 floor vents in this thing!
The 4 screws that install it hold it together, but theres also 2 plastic pins that glue the assy together. So we have to carefully disassemble it, so we can re-glue the pins later
The whole thing broken down
Parts painted, and i bought cheap foam and weather stripping from Lowes to replace all the dryrotted seals
the halves clamped back together, so i could re-epoxy the two pins
all done, with the correct kick panel
...and finally, installed!
I hope this was worth the effort, i guess time will tell!
main site/photo gallery:
Sort by Topic