Ok so i lied...9/25/2020 Ok, decided the next step actually was to re-install the OBA. This took longer than i thought, but atleast its done! So with the York on the passenger side down where the smog pump used to be, i had to completely rebuild my manifold. Started with the bracket to mount it: after multiple tries, the rough draft: the oil return for the york crank case is buried down there. I can barely see it, let alone get to it So i bent up some 1/4" stainless tubing, to get it out and in the open: Much better! manifold done and installed! That round black cylinder next to the alt is my intake filter. 3½ gallon tank underneath the rear bench seat: air chuck at front bumper: ...and the air chuck at the rear bumper: I still have to re-run the air line for the ARB. Now that the solenoid is on the other side of the engine bay,the supply tube is no longer long enough, so i have to get some more. But aside from that (and the wiring), the OBA is done! So with that done, it looks like i cant put it off any longer, and next week ill be doing a ton of wiring. Comments are closed.
main site/photo gallery:
4x4.forensick.net Sort by Topic
All
Archives
October 2020
|