holy crap wiring 99% done!

So this took a while, but the end result was well worth it.  All the aux wiring is done!!

So, i bought a relay box off amazon:

​Switches for the locker, line lock, light bar & winch control are installed:

​i bought 18ga 12 conductor cable to wire the switches:

​Wiring up the fuse/relay box:

I have one standalone circuit for each accessory, plus one spare already run from the box to the dash, so if i ever want to add another switch, all the wiring is already done.
Everything is color coded; the switch wiring is color matched to the individual +12 for each accessory so i cant mix up any wires. There is also a key-hot power source turning on 2 of the relays; one is for the OBA system, and the second is for the elec fan, so i dont have to worry about remembering to turn either on.

...and installed!

A​t this point, every accessory has been wired, and tested for function.

---