somebody had to do it. |
|
Disassembly continues...10/24/2016 So that gets us to about a week or so ago, when I started dismantling it. All glass removed:  Top gone!  My new convertible!  Still runs at this point so i drove it into the garage for the night:  Next day, Bed is gone. Im saving this part:  Bed off   Day 3, started stripping the front-end    Here's a good reason to cage your truck: The cab corners twisted enough I couldn't get to the seatbelt bolts!  ...and finally!  Stripped down to basically nothing at this point  This catches us up to today. Tomorrow I begin loading up the truck as I have a mountain of steel to scrap from cutting up both trucks. I painstakingly removed the harness from both so I can reuse them, along with a bunch of other parts, which made the disassembly take about a week, altho its obviously all done now. So the plan for this week is to dump all the scrap steel, and then just get the frame clean. Then I have a few things I have to do, before dropping the new tub on the frame. Getting ever closer now! Comments are closed.
|